EarFun Free

The Ultra-comfortable True
Wireless Earbuds

6mm Graphene Driver for Superior Sound

The graphene driver in EarFun Free delivers sound on par with larger more expensive speakers without the bulk or expense
  • Stable Bluetooth 5.0

  • IPX7 Sweat & Waterproof

  • Advanced Wireless Charging

  • Superior Sound Quality

  • Snug & Ultra-Comfortable

  • 30+ hrs Playback

  • Noise Cancellation Handsfree Call

  • Environmentally Friendly

Snug Fit
Ergonomic Design

Ergonomic design for long-wearing comfort and stability, no matter what you are doing. With ear tips in 3 sizes, EarFun free offers you a comfortable and snug fit.

Pairing

  • Instant Pairing

    After a one-time setup, the earbuds will automatically turn on and pair with your smart device. Just open the case and wear them, EarFun Free works flawlessly within a range of 15 Meters (49 Feet).

  • Stable Bluetooth Connection

    EarFun Free is powered by the most advanced Bluetooth 5.0 protocol which dramatically enhances the stability and connection of the earbuds.

100% IPX7 Waterproof & SweatShield Technology

Featuring IPX7 waterproof rating and innovation SweatShield technology, EarFun Free enables you to get through the toughest workout in all weather conditions and environment.

March

Noise Canceling Hands-Free Calls & intuitive Button control

Built-in MEMS microphone with noise cancellation assures your crystal-clear hands-free call in noisy circumstances. Voice command makes it more convenient to control. A special control button that triggers command with only 80g of force to slove the problem of mistake touch of other touch control earbuds.

30-Hour
Uninterrupted Playback

After a full charge, the earbuds offer 6 hours of listening time, and the handy charging case provides a further four charges to keep you going throughout the day. That's up to 30 hours of uninterrupted listening.

Hiking

USB-C Connectivity

With the latest USB technology, Type-C, EarFun Free is more convenient to charging with greater compatibility.

Portable & Secure

EarFun Free’s unique design helps to ensure that you don’t easily lose your earbuds.

Advanced Wireless Charging

No wires, no worries. Power up your EarFun Free by simply placing the charging case on the wireless charging pad with QI wireless charging.

Designed for Multi-Scenario Use

Enjoy the freedom to go further with EarFun Free true wireless earbuds. Whether you’re in the office working or outside for multi-sports, the EarFun Free is truly wireless to compliment your active lifestyle.

6mm Graphene Driver for Superior Sound

With the built-in 6 mm graphene drivers, EarFun Free offers powerful deep bass and premium sound.

TECH SPEC

Bluetooth Version : V5.0
Bluetooth Profile : A2DP , AVRCP , HFP , HSP
Earbuds Battery : 2*50mAh
Earbuds Battery Life : Up to 6 hours (varies by volume level and audio content)
Earbuds Charging time : About 1.5 hour
Charging Case battery : 500mAh , it can charge about 4 times for earbuds
Battey Case Charging Time : USB-C about 2 hours , Wireless charging about 2.5 hours
Input : DC5V / 1A
Material : ABC , PC , TPU
Total Weight : 60g / 2.08oz(including charging case)
Net Weight : 5.5g / 0.19oz each earbud on average
Listening Distance : Up to 15m

What’s in the Box?

FAQ

If the earbuds become disconnected or have other problems, you can reset and reconnect to resolve. Kindly check the below reset and reconnect instructions for ref.
Step 1: Unpair EarFun Free from your Bluetooth-enabled device and delete the old connection on your device.
Step 2: Pick up the earbuds from the case and press the buttons for 2s at least to power off until they flash in red.
Step 3: Press and hold the button on each earbud simultaneously for at least 8s until they flash in purple (Do press until they flash in purple. If not, they aren't reset successfully.)
Step 4: Place it back into the case and remove it again to start reconnecting (or press the earbuds to manually power the earbuds on)

Step1: Take out R and L earbuds from the case, and they will automatically enter into pairing mode(flash blue).
Step2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
Step3: Select "EarFun Free" from the Bluetooth devices shown to connect( if a password is needed, type “0000”).

Confirm the charging case has power (at least one LED is lit up). Ensure all charging contact pins on the earbuds and charging case is clean and clear of foreign material.

Place both earbuds back in the charging case and close it, then take them both out and try again. If this doesn't fix the problem, try resetting the Earfun Free.

Please put the charging case on a wireless charging pad or connect it to Type C charging cable to charge until all four lights are illuminated.

By default, double press the right earbud will activate Siri or Google Assistant. You’ll hear a tone and the microphone on your earbuds will activate so you can say a command.
Note: Please make sure to set up the assistant on your device first, or voice activation on the earbuds will not work.

You can use EarFun Free earbuds for Skype, WhatsApp, and other audio or music features on your device.
First, pair your EarFun Free earbuds to your device. Once connected,
you may need to select your earbuds as the default playback and output device in the audio settings of your device’s operating system.
Your earbuds have to be on and connected in order to show up in your device’s sound settings.

Mac
From the Apple menu, select System Preferences.
Open the Sound preference pane.
Select the Output tab.
Select EarFun Free.
Select the Input tab.
Select EarFun Free.

PC with built-in Bluetooth
Open your Control Panel.
Select Hardware and Sound.
Select Manage audio devices (under Sound).
Select “EarFun Free” and click Set Default.
Click OK.

EarFun Free earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 15 minutes.

No, the earbuds are 100% IPX7 sweat & waterproof, but the charging case is not waterproof.

We do have 18 months worry-free warranty and you can register to be our website user for support. We are always out there to make it right and therefore please don’t hesitate to let us know your problem and order ID , via email on: service@myearfun.com

The right earbud is the “master” that can be used alone, and left earbud is the “slave” that can’t be used alone.

No. Each earpiece has 1 button on the side. These are used for pairing, and turning them on and off. You must use whatever device you have paired them to in order to control the volume.

HEAR US TO GET UPDATES

captcha
0.038008s